Ancillary Equipment

Over-voltage controllers – type OVDC

  • provide high initial force & low holding power
  • stroke and holding voltage
  • avoids unnecessary heating/power consumption
  • plug connector and screw terminal versions
Datasheet

Vibrator controllers – type UV

  • for use with product range W/YZA/UW
  • full wave and half wave versions
  • from 2 amp up to 15 amp
  • proportional control version for use with 4 – 20mA or 0- 5v/10v signal
No product specification available.

Firing unit – type F1

  • weatherproof construction
  • push-button operation
  • for use primarily with our Electro Kabuki range
  • can also be used with other solenoids from our range
No product specification available.

Spring return sets

Sets of spring return attachments are available for several of our solenoid ranges

  • conical return springs optimum performance
  • compliments the solenoid force/stroke characteristic
  • stainless steel for corrosion resistance
  • bolt-end and clevis attachments
  • see example set to suit our GFC range of open-frame solenoids

Ask about our other return springs for other solenoid ranges - custom designs can be provided at short notice.

Datasheet

ZKBX/G ZKCX/G Plug connectors – type ZKBX/G ZKCX/G

  • DC/DC Type
  • AC/DC Type with integral full-bridge rectifier
  • 2 standard DIN sizes
  • IP 65 protection with gland seal and rubber gasket
  • versions with LED and other options available
Datasheet

Clevis ends – type ZGA

A range of clevis ends available for attachment to solenoid armatures and push-rods

  • spring-clip design for ease of use
  • plated finish for corrosion resistance
  • provides loose-coupled movement for in-line bearing applications eliminating side-loads on the solenoid armature & so maximising performance
Datasheet