Ancillary Equipment

Over-voltage controllers – type OVDC

Version OVDC
Version OVDC7-22

• provide high initial force & low holding power
• stroke and holding voltage
• avoids unnecessary heating/power consumption
• plug connector and screw terminal versions

Vibrator controllers – type UV

• for use with product range W/YZA/UW
• full wave and half wave versions
• from 2 amp up to 15 amp
• proportional control version for use with 4 – 20mA or 0- 5v/10v signal

Firing unit – type F1

• weatherproof construction
• push-button operation
• for use primarily with our Electro Kabuki range
• can also be used with other solenoids from our range

Spring return sets
Sets of spring return attachments are available for several of our solenoid ranges

• conical return springs optimum performance
• compliments the solenoid force/stroke characteristic
• stainless steel for corrosion resistance
• bolt-end and clevis attachments
• see example set to suit our GFC range of open-frame solenoids

Ask about our other return springs for other solenoid ranges - custom designs can be provided at short notice.

Plug connectors – type ZKBX/G ZKCX/G

• DC/DC Type
• AC/DC Type with integral full-bridge rectifier
• 2 standard DIN sizes
• IP 65 protection with gland seal and rubber gasket
• versions with LED and other options available

Clevis ends – type ZGA
A range of clevis ends available for attachment to solenoid armatures and push-rods

• spring-clip design for ease of use
• plated finish for corrosion resistance
• provides loose-coupled movement for in-line bearing applications eliminating side-loads on the solenoid armature & so maximising performance